Six specialised chemical categories — sourced from certified manufacturers with full technical documentation.
Polydimethylsiloxane (PDMS) fluids in a precision-calibrated viscosity range. Clear, colorless, odorless, and non-toxic.
| Grade / Viscosity (cSt) | Specific Gravity (25°C) | Refractive Index (25°C) | Flash Point (°C) | Surface Tension (dynes/cm) |
|---|---|---|---|---|
| Low: 0.65 – 10 | 0.760 – 0.930 | 1.375 – 1.400 | > 160 | 20.1 |
| Medium: 20 – 1,000 | 0.950 – 0.970 | 1.400 – 1.403 | > 300 | 20.5 – 21.2 |
| High: 5,000 – 65,000 | 0.970 – 0.980 | 1.403 – 1.404 | > 300 | 21.3 – 21.5 |
Applications
Performance-enhancing chemical additives engineered for agricultural applications, optimising the delivery, stability, and efficacy of crop protection products.
RESICARE and RESISPERSE polyether-modified polysiloxane and trisiloxane ethoxylate adjuvants that reduce spray solution surface tension below 25 mN/m, promoting stomatal flooding, rain-fastness, and spray volume reduction. Tank-mix dose: 0.015%–0.12%. Compatible with biologicals and bio-based formulations.
| Product | Chemistry / Form | Spreading | Penetration | Rain-fastening | Wetting |
|---|---|---|---|---|---|
| RESICARE PSW Outstanding Super-Spreader — superior performance in humid & wet field conditions |
Trisiloxane ethoxylate (liquid) | Exceptional | Excellent | Excellent | Good |
| RESICARE TSW High-Performance Super-Spreader — versatile; reduces spray volume across diverse crops |
Trisiloxane ethoxylate (liquid) | Excellent | Excellent | Excellent | Good |
| RESISPERSE MSW OMRI Super Spreader, Rain-fast Grade — optimised for humid & wet application conditions |
Trisiloxane ethoxylate (liquid) | Excellent | Excellent | Excellent | Good |
| MSW C7 SUPER OMRI Economical Tank-mix Spreader — wide range of agricultural uses; spray volume reduction |
Trisiloxane ethoxylate C7 (liquid) | Excellent | Excellent | Excellent | Good |
| RESICARE MSW B8 SUPER Economical Spreader — cost-effective coverage; broad application range |
Trisiloxane ethoxylate B8 (liquid) | Excellent | Good | Good | Good |
| RESICARE GREENSIL TT Surfactant & Methyl Ester Blend — soybean-derived; improves weed control reliability |
Methyl ester (soybean oil) | Medium | Excellent | Excellent | Good |
Silicone-based antifoam emulsions and powders for agricultural formulations and tank mixing. Provides rapid foam knockdown and lasting suppression during high-speed mixing, bottling, and spray application across a broad pH range.
| Product | Form | Key Performance | Primary Applications |
|---|---|---|---|
| RESIFOAM 1013 High-Performance Silicone Antifoam Emulsion |
Liquid emulsion | Rapid initial knockdown with long-lasting effectiveness; effective at low dosage; particularly effective with nonionic surfactants | Herbicides, insecticides, fungicides, foliar nutrients |
| ANTIFOAM SIGMA 50 Silicone Antifoam Emulsion |
Liquid emulsion | Excellent foam control at low concentrations; broad compatibility across formulation types | General agro formulations |
| TAF 200 AG Silicone Antifoam, Aqueous Systems |
Liquid | Wide-spectrum aqueous foam control; fast knockdown; stable under high shear and elevated temperature | Pesticide & herbicide formulations; tank mixing operations |
| GREENSIL PD Silicone Powder Antifoam |
Wettable Powder (WP) | Superior knockdown, sustained antifoaming; easy incorporation into dry systems | Wettable powder & dry formulation systems; biotech applications |
Dispersing agents ensure uniform distribution of active ingredients in pesticide and herbicide formulations by reducing surface tension between the active and liquid phase. Prevents clumping, sedimentation, and Ostwald ripening, enhancing stability and application efficacy across SC, WP, and WDG formulations.
| Product | Form | Key Performance | Formulation Types |
|---|---|---|---|
| RESISPERSE NSDA Sodium Salt of Alkylnaphthalene Sulphonate Condensate (Powder) |
High-active solid condensate | High-active wetting & dispersing; minimises milling time; controls crystal growth (Ostwald ripening) over shelf life; prevents hard settling & agglomeration | SC · WP · WDG |
| RESISPERSE LDA Sodium Salt of Alkylnaphthalene Sulphonate Dispersion (Liquid) |
Liquid dispersion | Reduces intersurface tension between active & liquid; enhances wetting of active; ensures uniform suspension; prevents settling & agglomeration | SC · Liquid concentrate formulations |
Ready-to-dilute NPK suspension concentrates for fertigation and foliar nutrition. Fully water-dispersible, storage-stable across temperature extremes (5°C to 54°C), and compatible with standard agrochemical equipment. Available with optional micronutrient fortification (Zinc, Boron, Calcium, Magnesium).
| Grade | N : P : K (%) | Micronutrients | Type | pH | Viscosity | Storage Stability |
|---|---|---|---|---|---|---|
| NPK 6-0-18 + Ca B Mg | 6 : 0 : 18 | Ca, B, Mg | SC (liquid) | 6.0 – 7.5 | — | Stable 0°C (7d) · 54°C (14d) |
| NPK 11-11-8 + Zn + B | 11 : 11 : 8 | Zn (EDTA) 0.7% · B 0.5–0.7% | SC | 5.0 – 6.5 | 1,700 cPs | Stable 5°C · 25°C · 54°C |
| NPK 11-11-11 | 11 : 11 : 11 | — | SC | 4.5 – 5.5 | 2,500 cPs | Stable 5°C · 25°C · 54°C |
| NPK 21-21-21 | 21 : 21 : 21 | — | SC | 5.5 – 6.5 | 4,100 cPs | Stable 5°C · 25°C · 54°C · No crystal growth at low temp |
High-load micronutrient SCs for correcting zinc, calcium, and boron deficiencies in field crops. Sub-micron particle size (D90 < 7 µm) ensures spontaneous dispersion, zero persistent foam, and sustained stability through cold and accelerated heat storage tests.
| Product | Active Content | Type | pH (1% aq.) | Specific Gravity | Viscosity | Particle Size D90 |
|---|---|---|---|---|---|---|
| Zinc Oxide 39.5% SC | Zn (as ZnO) 39.5% | SC | 8.1 – 8.2 | 1.77 g/L | 520 – 535 cP | ≤ 1.43 µm |
| Ca 21% + Zn 1.5% + B 0.1% SC | Ca 21% · Zn 1.5% · B 0.1% | SC (WW) | 8.5 – 8.6 | 1.50 g/L | 432 – 490 cP | ≤ 6.1 µm |
High-performance release systems, process defoamers, and anti-foams for rubber, tire, and die-casting industries.
PDMS and modified silicone emulsions providing mold release and surface shine for rubber goods, tires, and polyurethane articles.
| Product | Chemistry | Active Content | Key Characteristics |
|---|---|---|---|
| RESIL E42SR | Polydimethylsiloxane emulsion | — | Economical and effective release for rubber goods; multipurpose shining agent |
| RELEASE SR 40 | Polydimethylsiloxane emulsion | 40% | Industry standard rubber release for moulded parts |
| RESIL SHINE SR | PDMS medium viscosity emulsion | 20% | Release agent and shining agent for rubber substrates |
| RESIL ERA 40 | Medium MW silicone / modified silicone | 60% | Release agent; provides shine on released articles |
| RESIL DMSD-50 | PDMS dispersion in solvent | 50% | Solvent-based release and shining agent for rubber substrates |
| RESIL MH 60E | Methyl hydrogen silicone emulsion | 60% | Semi-permanent release for rubber and polyurethane articles |
Polydimethylsiloxane fluids delivering soft hand feel, hydrophobicity, and durable finish enhancement for leather substrates.
| Product | Chemistry | Viscosity Range | Application |
|---|---|---|---|
| DMC SERIES | Polydimethylsiloxane fluids | 0.65 – 12,500 cSt | Siliconization of leather, glass, metals, and plastics; soft hand feel |
| DHV SERIES | High MW polydimethylsiloxane | 5,000 – 1,000,000 cSt | Leather hydrophobicity; moisture barrier and protective finish |
| RESIL 8040 | Silicone-based leather finish | — | Enhanced leather finish and durability |
APEO-free silicone emulsions and pure PDMS fluids for die-casting release, EVA process lubrication, and metal working applications.
| Product | Chemistry | Active / Viscosity | Application |
|---|---|---|---|
| RESIL DSSD-APF | PDMS emulsion (APEO-free) | 60% active | Release and lubricating agent for EVA and rubber; die-casting process additive |
| MFSF-1K | Alkyl modified polysiloxane, 100% PDMS | 1,000 cSt | Metal working lubricant; industrial process lubrication; soluble in non-polar solvents |
Two-part, platinum-catalysed, heat-cured silicone resin systems for coating composite and metal-based head gaskets against heat and chemical erosion.
| Product | System | Application |
|---|---|---|
| AUTOCAT GCC | Platinum-catalysed addition-cure silicone resin (two-part, heat-cured) | Head gasket coating — composite and metal substrates |
| AUTOSIL GCP | Platinum-catalysed addition-cure silicone resin (two-part, heat-cured) | Head gasket coating — composite and metal substrates |
| RESICOT 164 | Platinum-catalysed addition-cure silicone resin (two-part, heat-cured) | Head gasket coating — composite and metal substrates |
| RESICOT 165 | Platinum-catalysed addition-cure silicone resin (two-part, heat-cured) | Head gasket coating — composite and metal substrates |
Silicone and non-silicone defoamers for latex processing, rubber manufacturing, and general industrial applications requiring foam control.
| Product | Chemistry | Key Characteristics | Applications |
|---|---|---|---|
| AFA2KI | 100% silicone antifoam compound | Industrial grade; rapid knockdown across a wide variety of foaming systems | Adhesives, solvent-based paints, latex processing |
| RESIL UDI | Mineral oil based, silicone-free defoamer | Silicone-free; suitable for silicone-sensitive systems | General industrial applications |
| RESIL DAF ED | Silicone antifoam emulsion (easily dispersible) | Easily dispersible; effective across wide variety of aqueous foaming systems | Textile processing, latex processing, waste water treatment |
Specialty additives for water-borne, solvent-borne, and solvent-free paint systems, enhancing performance during manufacturing, storage, and post-application at typical loadings of 0.01%–5%.
Prevents pigment settling during storage and sagging on vertical surfaces post-application. Improves in-can consistency, brush-ability, flow, levelling, and spatter resistance during roller application.
Prevents pigment flocculation and agglomeration. Drastically improves colour development, tinting strength, and gloss. Reduces dynamic surface tension to prevent crawling and cratering over difficult or contaminated substrates.
Rapidly breaks macro-foam during pigment grinding and micro-foam (entrapped air) formed during spray or roller application. Prevents surface defects including pinholing and fisheyes in the final film.
Micro-roughens the dry coating film to diffuse incident light. Delivers efficient, consistent gloss reduction to achieve matte, satin, or eggshell finishes without compromising transparency or film toughness.
Acts as a molecular bridge between the organic coating binder and inorganic or difficult substrates. Ensures long-term adhesion and moisture resistance on low-surface-energy plastics and non-porous metals.
UVA acts as a molecular sunblock, absorbing harmful UV radiation and dissipating it as heat. HALS scavenges free radicals formed by photo-oxidation, breaking the polymer degradation cycle. Prevents chalking, cracking, embrittlement, and pigment fading.
Premium-grade organic pigments with brilliant, clean shades, exceptional tinting strength, and outstanding weatherability for paints, inks, plastics, and rubber applications.
| Pigment Class | Chemistry | Shades | Key Properties | Primary Applications |
|---|---|---|---|---|
| Phthalocyanines | Copper Phthalocyanine (CuPc) | Blues · Greens | Outstanding lightfastness, high tinting strength, excellent heat & chemical resistance | Architectural paints, printing inks, plastics |
| Quinacridones | Linear / Unsubstituted Quinacridone | Reds · Violets · Magentas | Brilliant clean shades, exceptional weatherability, high temperature stability (>300°C) | Automotive coatings, industrial finishes, printing ink |
| DPP (Diketopyrrolopyrrole) | Pyrrolopyrrole Dione | Reds · Oranges | Highest lightfastness (8/8), outstanding heat stability, full solvent resistance | Automotive OEM, premium decorative paints, masterbatches |
| High-Grade Azo | Monoazo & Disazo compounds | Yellows · Oranges · Reds | Good tinting strength, broad shade range, cost-effective performance | Architectural paints, rubber compounding, printing inks |
Application Areas
High-purity silane coupling agents and surface-treatment silanes for adhesion promotion in paints and coatings, water repellency for granite and natural stone, cable insulation, composite reinforcement, and semiconductor processing.
| Series | Chemical Name | CAS Number | Reactive Group | Primary Industrial Use |
|---|---|---|---|---|
| Amine (A) | 3-Aminopropyltriethoxysilane (APTES) | 919-30-2 | Amino | Adhesion promoter for urethanes/epoxies to glass & metals |
| Amine (A) | 3-Aminopropyltrimethoxysilane (APTMS) | 13822-56-5 | Amino | Surface treatment of fillers; coupling agent for mineral-filled polymers |
| Amine (A) | N-Aminoethyl-3-aminopropyltrimethoxysilane (DAMO) | 1760-24-3 | Diamine | Epoxy curing agent; adhesion promoter for nylon and polyester |
| Chloropropyl (C) | 3-Chloropropylmethyldimethoxysilane | 18171-19-2 | Chloropropyl | Intermediate for synthesis of organofunctional silanes |
| Epoxy (O) | 2-(3,4-Epoxycyclohexyl)ethyltrimethoxysilane | 3388-04-3 | Cycloaliphatic Epoxy | High-performance adhesive and coating systems |
| Epoxy (O) | 3-Glycidoxypropyltrimethoxysilane (GLYMO) | 2530-83-8 | Epoxy | Moisture resistance in PC encapsulants & structural adhesives |
| Vinyl (V) | Vinyltriethoxysilane (VTES) | 78-08-0 | Vinyl | Crosslinking of polyethylene; moisture-cure cable insulation |
| Vinyl (V) | Vinyltrimethoxysilane (VTMO) | 2768-02-7 | Vinyl | Moisture-crosslinking for XLPE cable insulation |
| Methacrylate | 3-Methacryloxypropyltrimethoxysilane (MEMO) | 2530-85-0 | Methacrylate | Property enhancement in fiberglass-reinforced plastics |
| Alkyl (W) | Isobutyltrimethoxysilane (IBTMO) | 18395-30-7 | Isobutyl | Water-repellent impregnation of granite, natural stone, concrete, and masonry |
| Alkyl (W) | Propyltrimethoxysilane (PTMO) | 1067-25-0 | Propyl | Hydrophobic surface treatment for mineral substrates and filler modification |
| Acetoxy | Methyltriacetoxysilane (MTAS) | 4253-34-3 | Acetoxy | Condensation-cure silicone sealants and coatings |
| Ketoxime | Methyltris(methylethylketoxime)silane | 22984-54-9 | Ketoxime | Neutral-cure RTV silicone sealants |
| Siloxane | Octamethylcyclotetrasiloxane (D4) | 556-67-2 | Cyclic Siloxane | Intermediate for PDMS; personal care base fluid |
| Siloxane | Hexamethyldisilazane (HMDS) | 999-97-3 | Silazane | Surface treatment of silica fillers; semiconductor photolithography |
Key Application Areas
Phosphorus-based flame retardants and plasticizers for PU foams, engineering plastics, PVC, and synthetic rubbers.
| Chemical Compound | Full Name | Function | Primary Application |
|---|---|---|---|
| TCPP | Tris(2-chloroisopropyl) Phosphate | Flame Retardant | Rigid and flexible PU foams for furniture and insulation |
| TEP | Triethyl Phosphate | Plasticizer / FR | Viscosity reducer for UPE resins and polyurethanes |
| BDP | Bisphenol-A Bis(diphenyl phosphate) | Halogen-Free FR | Engineering plastics (PC/ABS) for electronic housings |
| IPPP | Isopropylated Phenyl Phosphate | FR Plasticizer | PVC and synthetic rubbers requiring flexibility |
Alkyl alkoxysilanes, oligomeric siloxanes, and silane/siloxane micro-emulsions providing deep-penetrating, breathable hydrophobic protection for concrete, masonry, and natural stone.
Water-based repellent for bricks, natural stone, and terracotta. Penetrates capillary pores and chemically bonds with silica to form a durable hydrophobic matrix without altering visual appearance. Preserves substrate breathability and prevents efflorescence (white staining) and freeze-thaw damage.
Deep-penetrating silane sealer for concrete bridges and parking structures. Provides long-term chloride ion protection, preventing corrosion of reinforcement steel. Protects against freeze-thaw damage and water-soluble salt transport. Colourless, non-film-forming.
Eco-friendly water-borne formulation combining the deep penetration of silanes with the immediate water repellency of siloxanes. Ideal for large-area application on cementitious plasters and rendered facades. Low VOC, easy to apply by brush, roller, or spray.
High-performance silicone emulsions, conditioning polymers, surfactants, and specialty antifoams for hair care, skin care, fabric care, and household cleaning formulations — sourced from Resil Chemicals.
Pure dimethicone fluid in a range of viscosities for use in shampoos, conditioners, and leave-on treatments. Imparts smoothness, shine, and detangling without greasiness. Compatible with anionic, cationic, and amphoteric surfactant systems.
Substantive conditioning polymer that selectively deposits on damaged hair fibre. Provides superior wet and dry combing ease, reduces breakage, and imparts intense shine and softness. Ideal for rinse-off and leave-on conditioning formulations.
Light, fast-evaporating silicone carrier fluid that imparts a dry, non-greasy skin feel and instant slip to hair serums, dry oils, and heat-protection sprays. Evaporates cleanly, leaving a silky film of active conditioning agents on the hair.
Pre-emulsified polydimethylsiloxane for easy incorporation into lotions, creams, and sunscreens. Provides a silky, non-tacky afterfeel, improves spreadability, and acts as a water-repellent barrier on the skin surface without clogging pores.
Soft-focus silicone elastomer that blurs imperfections and imparts a velvety matte texture to primers, BB creams, and foundation formulations. Absorbs excess sebum and provides long-lasting sensory performance in colour cosmetics.
Microemulsion of amino-modified PDMS for rinse-cycle fabric softeners and dryer sheets. Delivers superior softness, reduces static, improves iron-glide, and imparts a durable silky hand feel on cotton, synthetic, and blended fabrics.
High-concentration PDMS and hydrophobic silica antifoam for liquid detergents, dishwash formulations, and hard-surface cleaners. Controls foam during production and maintains foam profile in diluted-use conditions. Effective at very low dosages (50–200 ppm).
🔍
Try a different keyword or clear the search field.
Documentation available on request: Certificate of Analysis (CoA), Material Safety Data Sheet (MSDS), Certificate of Origin, and technical data sheets for all products.
